[.01] Thunderbird identification does not work with sandoxie

Listing issues addressed in beta version 4.05
Locked
SuNiNi-gst

[.01] Thunderbird identification does not work with sandoxie

Post by SuNiNi-gst » Tue Jun 18, 2013 10:43 am

Hello,

today I updated my sandboxie 3.76 to 4.02 (without changing settings). After that sandboxed Thunderbird started without showing the identification pop-up anymore.

After reinstalling sandboxie 3.76 it all worked fine again. Do you have any clou what went wrong?

My system: win 7 64 bit service pack 1

Thank you for every information


greets SuNiNi

Guest10
Posts: 5124
Joined: Sun Apr 27, 2008 5:24 pm
Location: Ohio, USA

Post by Guest10 » Tue Jun 18, 2013 2:21 pm

I'm not sure what you are referring to as an identification pop-up.
Can you describe it further?

Whatever it is I probably have it turned off, since I don't like pop-ups of any kind.
Plus, I use XP and haven't had any problems with the v4 series.
Paul
Win 10 Home 64-bit (w/admin rights) - Zone Alarm Pro Firewall, MalwareBytes Premium A/V, Cyberfox, Thunderbird
Sandboxie user since March 2007

SuNiNi

Post by SuNiNi » Wed Jun 19, 2013 2:41 am

Hello Paul ,

thank your for your reply and sorry for my poor English!

What I mean is: Thunderbird starts without problems in sandboxie, but I cannot receive mails because the authentication window to submit my password does not occur when sandboxed with sandboxie 4.02. So I reinstalled sandboxie 3.76 and erverything was fine again.

My system is win 7 home premium, 64 bit, service pack 1 and completly updated

Thank you again for your concern :)

greets SuNiNi

Guest10
Posts: 5124
Joined: Sun Apr 27, 2008 5:24 pm
Location: Ohio, USA

Post by Guest10 » Wed Jun 19, 2013 7:24 am

I have Thunderbird remember my passwords for downloading emails, so maybe that's why I don't see that problem.
Also, I use XP so that might be another reason why I don't see that problem.
Paul
Win 10 Home 64-bit (w/admin rights) - Zone Alarm Pro Firewall, MalwareBytes Premium A/V, Cyberfox, Thunderbird
Sandboxie user since March 2007

Securebrowser12
Posts: 2
Joined: Thu Jun 20, 2013 10:44 am

Re: Thunderbird identification does not work with sandoxie 4

Post by Securebrowser12 » Thu Jun 20, 2013 11:04 am

SuNiNi wrote:Hello,

today I updated my sandboxie 3.76 to 4.02 (without changing settings). After that sandboxed Thunderbird started without showing the identification pop-up anymore.
hello sunini,


unfortunately I've got the same problem! I don't understand the problem as well!

If you find a solution, please write it here into the forum. I was'nt able to find the cause by google.

Greetings,

Kai

Guest10
Posts: 5124
Joined: Sun Apr 27, 2008 5:24 pm
Location: Ohio, USA

Post by Guest10 » Thu Jun 20, 2013 12:51 pm

I guess that this does not affect XP.
I deleted one of my email passwords, then used a newly created sandbox in which only the Thunderbird template was applied.

When I tried to check email messages for that account the "Enter your password" box opened, and the "Use Password Manager ..." box was unchecked.
After entering my password, the email server was checked for new emails.

Until a possible fix is found, if you are the only user you may want to run Thunderbird unsandboxed long enough to save your passwords to Password Manager.
You can always go back and delete them at:
Tools > Options > Security tab > Saved Passwords

If you're not the only user, then maybe you won't want to do that.
Last edited by Guest10 on Thu Jun 20, 2013 12:55 pm, edited 1 time in total.
Paul
Win 10 Home 64-bit (w/admin rights) - Zone Alarm Pro Firewall, MalwareBytes Premium A/V, Cyberfox, Thunderbird
Sandboxie user since March 2007

SuNiNi

Post by SuNiNi » Thu Jun 20, 2013 12:53 pm

Hallo Kai :)

vielleicht ist es ja ein Problem der deutschsprachigen Variante ;)

Hello all :)

is it possible that the experimental mode in which version 3.76 ran causes this problem when sandboxie is updated to 4.02 without changing settings?

and I forgot: my e-mail-client is Thunderbird 17.0.6

Greetings SuNiNi

SuNiNi

Post by SuNiNi » Fri Jun 21, 2013 9:05 am

Sorry for the double posting, but I don't know who to edit the one before.

My son just told me, that his PC, win 8 home (fully updated, Thunderbird 17.0.6), just shows the same problem with sandboxie 4.02 :(

tzuk
Sandboxie Founder
Sandboxie Founder
Posts: 16076
Joined: Tue Jun 22, 2004 12:57 pm

Post by tzuk » Sat Jun 22, 2013 1:11 pm

Thanks for the problem report. I will look into it.
tzuk

Grail Wuwetl

Maybe a trouble with Avast (and not with Thunderbird) ?

Post by Grail Wuwetl » Wed Jun 26, 2013 9:36 pm

HI, I have the same trouble.

Thunderbird remember my password, so i have no popup window for authentication.

When I try receive messages with Thunderbird sandboxed, nothing happens.

If I run Thunderbird unsandboxed, messages are received normally.

This happens since the installation of Sandboxie 4.02.

My antivirus is Avast Free 8.0.1489. Maybe a trouble with Avast ? In this post http://www.sandboxie.com/phpbb/viewtopic.php?t=14839 same issue is described.


Thunderbird 17.0.7
Sandoboxie 4.02
Windows 7 x86 SP1
Avast Free Antivirus 8.0.1489
Comodo Firewall 5.12.256249.2599

tzuk
Sandboxie Founder
Sandboxie Founder
Posts: 16076
Joined: Tue Jun 22, 2004 12:57 pm

Post by tzuk » Thu Jun 27, 2013 3:32 am

I am sorry but I was not able to reproduce the problem on 64-bit Windows 7.

Installed Thunderbird (17.0.7), set up a POP3 account.
When I start Thunderbird in the sandbox, it pops a dialog box to ask for my password.

Do you have any addons/utilities that are related to password entry, that could play a part here?
tzuk

ChuckG

Post by ChuckG » Thu Jun 27, 2013 8:49 am

Hi,

I have the same problem with the latest Sandboxie and the latest Thunderbird. I have both IMAP and POP accounts configured. I rarely use the POP accounts, so I don't know if they're working or not. I definitely know that my IMAP is not working. My passwords were previously saved in Thunderbird (for quite some time) before upgrading to the latest Sandboxie. I don't have any add-ons installed in Thunderbird or use any 3rd party password management. Starting Thunderbird outside of Sandboxie, however, works fine. I'm at work now and don't have all of the specific versions, but here's what I have installed at home:

Windows 7 x64 Professional
Sandboxie (4.02)
Thunderbird (17.0.7)
Avast! Free (latest)
MBAM Pro (latest)

Thanks,
Chuck

tzuk
Sandboxie Founder
Sandboxie Founder
Posts: 16076
Joined: Tue Jun 22, 2004 12:57 pm

Post by tzuk » Thu Jun 27, 2013 10:03 am

This problem has to do with avast as Grail Wuwetl suggested earlier. With avast installed I got the same problem with the password window not showing. Unfortunately I don't see anything I can do about it: Same problem even if I block avast DLLs from going into Thunderbird, and run with very permissive settings in Sandboxie. Only thing that fixes the problem is to turn off the Mail Shield feature in avast. I'm sorry that I can't offer a better solution.
tzuk

SuNiNi
Posts: 3
Joined: Fri Jun 21, 2013 9:09 am

Post by SuNiNi » Fri Jun 28, 2013 8:23 am

Hello tzuk :)

thank you very much for your concern and your answer. - And yes, I also use Avast. To turn of Avast’s mail shield is a solution with which I can live.

I’m sure you'll solve this little problem until the next update of Sandboxie is released. Or perhaps it even vanishes, when Avast releases a new update
:wink:

greetings SuNiNi

tzuk
Sandboxie Founder
Sandboxie Founder
Posts: 16076
Joined: Tue Jun 22, 2004 12:57 pm

Post by tzuk » Thu Jul 18, 2013 7:46 am

It seems that avast is starting a helper process to do the certificate check, and the process is running outside the sandbox in the ANONYMOUS LOGON account because that is the account that programs in the sandbox use in version 4. Unfortunately avast does not detect the failue in the helper process and Thunderbird remains stuck.

Version 4.05.01 unfortunately does not fix the problem, but points you to the Known Conflicts page.
tzuk

Locked

Who is online

Users browsing this forum: No registered users and 0 guests