[.03] Clipboard enhancement programs.

semerra · Post by **semerra** » Wed Feb 27, 2013 10:21 pm

Since upgrading from version 3.76 to the .02 beta on Win 7 64x my clipboard enhancement program CLCL
http://www.nakka.com/soft/clcl/index_eng.html no longer works when using Firefox 19 sandboxed.

I can use Ditto without any problem.
http://sourceforge.net/projects/ditto-cp/

tzuk · Post by **tzuk** » Fri Mar 01, 2013 4:41 am

Thanks. I looked into it and there is a problem with putting data on the clipboard in version 4.
The problem is not with the clipboard viewer (clcl), even if you found one (Ditto) that knows to live with this problem.

I think this is the same problem as the one reported here:
http://www.sandboxie.com/phpbb/viewtopic.php?t=14909

I think I will have this fixed by the next beta version.

tzuk · Post by **tzuk** » Thu Mar 07, 2013 3:35 pm

If you would like to go back to using "clcl", version 4.01.03 may fix the problem.

I say "may" because it turns out Sandboxie has to adjust the data that was copied into the clipboard. Usually this happens before "clcl" would get to inspect the data, so everything seem fine. But it is possible "clcl" would get to the data first, and see it before the data was adjusted by Sandboxie. Unfortunately there isn't a 100% solution in this case.

semerra · Post by **semerra** » Thu Mar 07, 2013 6:41 pm

Thanks.

So far clcl is working with the .03 beta.
For the record I used Ditto for about a week with .02 and there were times when nothing at all was copied to the clipboard.

semerra · Post by **semerra** » Wed Jun 12, 2013 9:30 pm

I upgraded from the .08 to the .13 beta on Win 7 64-bit and I can no longer paste anything from the clipboard.
Only the copy function works.
I tried this with two clipboard enhancement programs CLCL and Ditto using Firefox and Internet Explorer.
This also happens with a sandboxed notepad.

tzuk · Post by **tzuk** » Thu Jun 13, 2013 3:29 am

I am sorry but there is nothing I can look into to fix, because it works correctly on my system.

I already explained to you in the topic about CLCL why this will not always work:

http://www.sandboxie.com/phpbb/viewtopic.php?t=14831

Try to use Process Explorer or Task Manager to give the CLCL process a lower priority, see if that makes a difference.

Please note that I will soon merge these posts here into that other topic.

semerra · Post by **semerra** » Thu Jun 13, 2013 4:04 am

My apologies.
The problem was that installing the .13 beta changed the settings in Webroot WSA from allow to deny/monitor for the sbie processes.
I have changed them back to allow and the clipboard is working again.

tzuk · Post by **tzuk** » Thu Jun 13, 2013 1:58 pm

No problem. I'm glad to hear the problem was specific to your setup and the fix was simple.

Sandboxie Support

[.03] Clipboard enhancement programs.

[.03] Clipboard enhancement programs.

[.13] clipboard problems cannot paste

Who is online